The wood trim is widely used in the home decoration project, because the natural wood has its own color and wood grain. There are many kinds of wood species used to produce the trim products, normally they are classified into hard wood and soft wood. The common hard wood includes the oak, maple, poplar, walnut, cherry, birch etc. The common soft wood include the pine, fir, cedar, etc. The soft wood is easier to work on it, you can carve different pattern on the wood surface. Compared the price, the soft wood is cheaper than hard wood. There are several soft wood, then which one is the most common wood for trim products, the answer is the pine wood.
Cost-effective products
The pine wood price is much cheaper then the hard wood price and also lower than other soft wood species, but its decorative function is not worse than other wood moulding products
Easy to work
The pine wood is very soft, so it is easy to work on it, different kinds of moulding products can be produces if you choose the pine wood and the moulding surface is very smooth and clean.
Easy to install
The pine moulding can be installed with the nail or adhesive, because it is soft, so even if you install the pine moulding with the nail, it is easy to handle and has good nail holding ability
Strength of our company
Advanced production equipment
We are equipped with advanced production equipment, the finger joint machine, the sanding machine and cutting machine are branded machine, they can produce the products according to the drawing totally
Quality control system
Our pine wood is imported from New Zealand, the quality is guaranteed.During the production process, we have strict product quality standard and before the delivery we also have the finial inspection.
Experienced in Products
Years of fulfilling moulding product orders have enabled us to accumulate substantial experience. We are highly seasoned in every aspect of the process—from product quality and design to actual production.
Comprehensive Service
Our service philosophy is to resolve a wide range of issues for our clients. Whether they are existing partners or potential customers, we spare no effort in providing them with the highest level of service.
How to determine whether pine moulding products quality
Check the raw material
You can examine the cut surface of pine moulding products. If the grain of the pine is clear and evenly distributed, the color is relatively clean, and the texture is fine, it indicates that the pine is of good quality, the product will be durable and can keep good performance for long time
Check the cutting edge
You also need to check the cut surface of the moulding. If the edges after cutting are smooth and clean, with minimal burrs, it indicates good quality. For white primed surfaces, you should also check whether the coating on the cut edge is intact and not peeling off.
Check the surface finish
For a qualified white primed surface finish, the surface should be smooth and clean, with a very even coating. The finish should also have good adhesion, so it will not easily peel off when the surface is bumped or scratched. In addition, the coating thickness should not be too thick. Our coating thickness is controlled at 0.18–0.2 mm.
Check the nail-holding ability
You need to test the nail-holding strength of the moulding, especially for finger joint moulding products. If the joints are not properly treated, the wood can easily split when a nail is driven in at the joint. If the nail-holding strength is poor, the moulding cannot be securely fixed to the wall, making installation very difficult.
What you can support us
- Prepare the Surface:
You should ensure the wall or ceiling surface is clean, dry, and smooth, then remove the dust, or old nails, or anything that might influence the installation.
- Measure and Cut the Moulding:
You need to measure the needed moulding length and mark the the length accordingly. Then use a saw to cut it precisely, the edges also need to clean to make it smooth.
- Attach the Moulding:
You can install the moulding on the wall or ceiling with nails or adhesive. For finger joint moulding, you need to check the nail-holding ability firstly, to avoid splitting.
Summary
If you want a wood moulding product but have a limited budget, you can choose pine wood moulding. Its durability and decorative effect will definitely not disappoint you.
